{"product_id":"creatbot-d400-hs-3d-printer","title":"CreatBot D400 HS High-Speed FDM 3D Printer CTD400HS","description":"\u003cp\u003eWhen a fixture, housing or functional prototype outgrows a typical desktop build plate, splitting it into smaller sections adds seams, assembly work and another source of dimensional error. Larger engineering-polymer parts also need better thermal control than an open-frame printer can provide; uneven cooling can lead to warped corners, cracking and layer separation.\u003c\/p\u003e\n\u003cp\u003eThe CreatBot D400 HS addresses both constraints in an enclosed professional FDM\/FFF platform. Its single-extrusion workspace measures 420 × 400 × 420 mm, while smart dual auto-rising extruders support secondary model materials, two-color work and dedicated support-material workflows.\u003c\/p\u003e\n\u003cp\u003eA 420°C maximum nozzle temperature, 120°C heated build plate and actively heated 70°C chamber provide the thermal range required by many standard, engineering-grade and fiber-reinforced filaments. For production efficiency, the D400 HS combines Klipper-based firmware with a maximum volumetric flow rate of 90 mm³\/s, automatic calibration, filament monitoring, power-loss recovery and remote camera access.\u003c\/p\u003e\n\u003cp\u003eThe D400 HS is positioned for engineering teams that have outgrown conventional desktop machines but do not require the footprint, power consumption or material capacity of a 600 mm or one-meter industrial printer.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e420 × 400 × 420 mm single-extrusion build volume:\u003c\/strong\u003e Produce larger prototypes, tools and end-use components as one part instead of dividing them solely to fit a smaller build plate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSmart dual auto-rising extruders:\u003c\/strong\u003e Use a second model, color or support material while the inactive nozzle lifts away from the part.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic dual-nozzle shutters:\u003c\/strong\u003e A mechanical shutter closes over each inactive nozzle to help control oozing during dual-extrusion printing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e420°C maximum nozzle temperature:\u003c\/strong\u003e Provides the thermal range needed by many engineering-grade and fiber-reinforced materials identified as compatible by CreatBot.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e70°C actively heated chamber:\u003c\/strong\u003e Maintains a more stable thermal environment around the part, reducing temperature gradients that can contribute to warping, cracking and interlayer separation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e120°C heated build plate:\u003c\/strong\u003e Supports adhesion and controlled first-layer conditions for higher-temperature materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e90 mm³\/s maximum volumetric flow:\u003c\/strong\u003e Supplies the material output needed for higher-throughput deposition when the nozzle, filament and part geometry permit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic bed and nozzle calibration:\u003c\/strong\u003e Eddy-current bed probing, camera-assisted XY alignment and photoelectric Z-offset sensing reduce repetitive setup work.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRemovable magnetic build surface:\u003c\/strong\u003e Allows the print surface to be removed for easier part release.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrint-recovery functions:\u003c\/strong\u003e Filament detection, power-loss recovery and dual-nozzle backup help protect longer print jobs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHEPA and activated-carbon filtration:\u003c\/strong\u003e Combines particulate filtration with odor and VOC adsorption inside the enclosed system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNetworked or offline operation:\u003c\/strong\u003e Transfer files over Wi-Fi or LAN, connect locally without cloud access, or print from a USB storage drive.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRemote camera monitoring:\u003c\/strong\u003e Check supported printer functions without remaining beside the machine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDoor-opening detection:\u003c\/strong\u003e Configure the printer to pause or stop if the chamber door is opened.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFunctional prototypes and design-validation models\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eJigs, fixtures and assembly aids\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eForms, patterns and molds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAutomotive and robotics components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHousings, brackets and equipment components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacement and spare parts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-volume and customized production\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEngineering-material process development\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMulti-material and two-color parts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eComplex geometries using soluble or breakaway supports\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplication suitability depends on the material, nozzle construction, slicing parameters, part geometry and required mechanical or dimensional performance.\u003c\/p\u003e\n\u003ch3\u003ePrinting, Thermal \u0026amp; Material Capability\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSingle- and Dual-Extrusion Capacity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe available workspace depends on the selected extrusion mode:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinting Mode\u003c\/th\u003e\n\u003cth align=\"right\"\u003eBuild Volume\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle extrusion\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e420 × 400 × 420 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual extrusion\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e365 × 400 × 420 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSingle-extrusion mode provides the full 420 mm X-axis capacity. Using both extruders reduces the usable X-axis width to 365 mm, which should be considered when a large part requires a second model or support material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart Dual Extrusion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two extruders rise independently. When one nozzle is inactive, it lifts away from the print plane to reduce the possibility of dragging across the printed part.\u003c\/p\u003e\n\u003cp\u003eA mechanical shutter closes over the inactive nozzle to help manage residual material flow during tool changes. This is particularly useful when combining a model material with soluble or breakaway support or when unwanted material transfer would affect the part surface.\u003c\/p\u003e\n\u003cp\u003eThe second nozzle can also operate as a filament backup during single-material printing. If the primary filament runs out, the machine can switch to the secondary nozzle and continue. This function requires:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe same material in both extruders\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIdentical nozzle diameters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA calibrated offset for the second nozzle\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing different materials or mismatched nozzle diameters in backup mode can cause flow problems, layer shifting or print failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eActively Heated Build Chamber\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLarger engineering-polymer parts are sensitive to the difference between extrusion temperature, previous-layer temperature and the surrounding air. As that temperature gradient increases, internal stress can pull corners away from the platform or separate the part along layer lines.\u003c\/p\u003e\n\u003cp\u003eThe D400 HS combines:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e420°C maximum nozzle temperature\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e120°C maximum build-plate temperature\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e70°C maximum chamber temperature\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAn insulated enclosure\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe actively heated chamber is particularly relevant to ABS, ASA, PC, nylon and reinforced materials that benefit from controlled cooling. It maintains more consistent conditions around the part instead of exposing every layer to ambient room air.\u003c\/p\u003e\n\u003cp\u003eThe D400 HS is not an ultra-high-temperature PEEK-class machine. Applications involving PEEK, PEI or other ultra-high-temperature polymers require a printer with substantially higher chamber and build-plate temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Flow Extrusion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrint speed alone does not determine production time. The extrusion system must melt and deposit enough material to support the selected travel speed, layer height and extrusion width.\u003c\/p\u003e\n\u003cp\u003eThe D400 HS has a specified maximum volumetric flow rate of 90 mm³\/s. This supports higher material output when paired with an appropriate material profile and nozzle. Larger nozzles can reduce print time for tooling, fixtures and substantial prototypes where throughput is more important than fine surface detail.\u003c\/p\u003e\n\u003cp\u003eActual output depends on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFilament type and melt behavior\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNozzle diameter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLayer height and extrusion width\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePart geometry\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCooling requirements\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupport strategy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSurface-finish expectations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMaximum machine capability should not be treated as the expected production setting for every material or feature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic Calibration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLarge build platforms amplify small setup errors. A minor height difference can cause poor adhesion in one area and excessive first-layer compression in another.\u003c\/p\u003e\n\u003cp\u003eThe D400 HS uses:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEddy-current bed leveling:\u003c\/strong\u003e Non-contact sensing measures the build surface and creates a compensation mesh.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCamera-assisted XY calibration:\u003c\/strong\u003e A macro camera assists with aligning the two nozzles across the X and Y axes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePhotoelectric Z-offset sensing:\u003c\/strong\u003e Dual sensors help establish the vertical relationship between the nozzles and platform.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eInput-shaper calibration:\u003c\/strong\u003e Klipper-based calibration helps tune the motion system for the installed configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCreatBot’s 0.001 mm bed-probing figure and its stated XY\/Z offset figures describe sensing or calibration precision. They are not guaranteed tolerances for finished parts. Final dimensional results also depend on material shrinkage, calibration, slicing parameters and geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemovable Magnetic Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe build system combines an aviation-aluminum platform with a removable magnetic sheet. The aluminum base provides a rigid, thermally conductive foundation, while the removable surface can be taken out of the enclosure for easier part removal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Materials\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCreatBot identifies the following materials as compatible with the D400 HS:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial Group\u003c\/th\u003e\n\u003cth\u003eCompatible Materials\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard thermoplastics\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, PP, TPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngineering thermoplastics\u003c\/td\u003e\n\u003ctd\u003eABS, ASA, PC, nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarbon-fiber composites\u003c\/td\u003e\n\u003ctd\u003eABS-CF, PC-CF, PET-CF, UltraPA-CF, PPS-CF, PA-CF, PP-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass-fiber composites\u003c\/td\u003e\n\u003ctd\u003ePET-GF, PA-GF, PP-GF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolymer blends\u003c\/td\u003e\n\u003ctd\u003ePA-ABS, PC-ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eCompatibility means the printer provides an appropriate general processing platform. It does not mean every filament can use the same nozzle, build surface or print profile.\u003c\/p\u003e\n\u003cp\u003eCarbon- and glass-fiber materials are abrasive. Confirm the installed nozzle material and the filament manufacturer’s hardware requirements before extended use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Print Protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cost of an interruption increases with part size and print duration. The D400 HS provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFilament runout detection and automatic pause\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower-loss recovery\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDual-nozzle filament backup\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRemote camera monitoring\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoor-opening detection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOn-screen speed and flow adjustment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore resuming after a power interruption, confirm that the part remains securely attached to the platform. Continuing with a warped or detached part can cause a printhead collision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCooling and Filtration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn external air-pump system supplies printhead and model cooling without relying entirely on air drawn from the heated chamber.\u003c\/p\u003e\n\u003cp\u003eThe enclosed filtration system combines:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eA HEPA particulate filter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAn activated-carbon filter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA chamber exhaust fan\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiltration can reduce particles, odors and volatile compounds released into the immediate environment. It should not replace facility ventilation or exposure controls required by the filament manufacturer, safety data sheet or workplace policy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFacility Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe D400 HS is offered in different regional electrical configurations:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Configuration\u003c\/th\u003e\n\u003cth align=\"right\"\u003eRated Power\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e100–120 V\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e2700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e210–240 V\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e3200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eConfirm the required voltage when ordering. The printer must be connected to a properly grounded outlet and an electrical circuit suitable for the selected configuration.\u003c\/p\u003e\n\u003cp\u003eCreatBot specifies indoor operation between 5°C and 30°C. The installation location should provide:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eA stable, level supporting surface\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClearance for loading, ventilation and service\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA properly grounded electrical connection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProtection from significant vibration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAppropriate material storage and environmental controls\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAn access route suitable for a machine weighing approximately 110 kg\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm current external and packed dimensions before planning doorway clearance, freight handling or final placement.\u003c\/p\u003e\n\u003ch3\u003eSoftware \u0026amp; Connectivity\u003c\/h3\u003e\n\u003cp\u003eCreatBot lists the D400 HS for use with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCreatWare\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOrcaSlicer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCura\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSimplify3D\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePrusa-based slicing workflows\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupported file formats listed by the manufacturer include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSTL\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3MF\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOBJ\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAMF\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSTEP\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSTP\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eG-code\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCreatWare is available for Windows and macOS. CreatBot also provides an older Linux version, which should be evaluated before Linux is selected as the primary production environment.\u003c\/p\u003e\n\u003cp\u003eFiles can be transferred using:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eUSB connection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB storage drive\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWi-Fi\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEthernet LAN\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe printer can operate over a local network without requiring an active internet connection. Supported local functions include printer access, file transfer and firmware management.\u003c\/p\u003e\n\u003cp\u003eCreatCloud app compatibility and the internal camera provide remote monitoring and supported printer-control functions. G-code can also be exported to a USB drive for offline printing in facilities that restrict cloud-connected equipment.\u003c\/p\u003e\n\u003ch3\u003eIncluded in the Purchase\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Component\u003c\/th\u003e\n\u003cth align=\"right\"\u003eQuantity\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCreatBot D400 HS printer system\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e1\u003c\/td\u003e\n\u003ctd\u003eVoltage configuration selected when ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart dual auto-rising extrusion system\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eIntegrated\u003c\/td\u003e\n\u003ctd\u003eIncludes two quick-release hotend positions and automatic nozzle shutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAluminum build platform with removable magnetic sheet\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eIntegrated\u003c\/td\u003e\n\u003ctd\u003eSupports automatic bed leveling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHEPA and activated-carbon filtration system\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eIntegrated\u003c\/td\u003e\n\u003ctd\u003eInstalled in the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal monitoring and alignment camera\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eIntegrated\u003c\/td\u003e\n\u003ctd\u003eSupports remote monitoring and camera-assisted XY calibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWi-Fi and Ethernet connectivity\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eIntegrated\u003c\/td\u003e\n\u003ctd\u003eSupports networked and local operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower cord\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e1\u003c\/td\u003e\n\u003ctd\u003ePlug type depends on the regional electrical configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe exact tool kit, supplied filament, spare parts and loose accessories will be confirmed in the formal quotation.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinting technology\u003c\/td\u003e\n\u003ctd\u003eFDM\/FFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-extrusion build volume\u003c\/td\u003e\n\u003ctd\u003e420 × 400 × 420 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual-extrusion build volume\u003c\/td\u003e\n\u003ctd\u003e365 × 400 × 420 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtrusion system\u003c\/td\u003e\n\u003ctd\u003eSmart dual auto-rising extruders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of nozzles\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard listed nozzle diameter\u003c\/td\u003e\n\u003ctd\u003e0.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional nozzle diameters\u003c\/td\u003e\n\u003ctd\u003e0.3, 0.4, 0.8 and 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum listed layer height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e420°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum build-plate temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum chamber temperature\u003c\/td\u003e\n\u003ctd\u003e70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum volumetric flow rate\u003c\/td\u003e\n\u003ctd\u003e90 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eKlipper-based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed-leveling method\u003c\/td\u003e\n\u003ctd\u003eAutomatic eddy-current leveling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY nozzle-offset calibration\u003c\/td\u003e\n\u003ctd\u003eHD camera-assisted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ-offset calibration\u003c\/td\u003e\n\u003ctd\u003eDual photoelectric sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild plate\u003c\/td\u003e\n\u003ctd\u003eAviation-aluminum plate with removable magnetic sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir filtration\u003c\/td\u003e\n\u003ctd\u003eHEPA and activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e7-inch touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFile transfer\u003c\/td\u003e\n\u003ctd\u003eUSB, USB drive, Wi-Fi and LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera monitoring\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDoor-opening detection\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal air cooling\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower-loss recovery\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament detection\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX\/Y positioning precision\u003c\/td\u003e\n\u003ctd\u003e0.00375 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ positioning precision\u003c\/td\u003e\n\u003ctd\u003e0.00156 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirements\u003c\/td\u003e\n\u003ctd\u003e100–120 V or 210–240 V, depending on regional configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e2700 W at 100–120 V; 3200 W at 210–240 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecified operating environment\u003c\/td\u003e\n\u003ctd\u003eIndoor use at 5°C to 30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine weight\u003c\/td\u003e\n\u003ctd\u003eApproximately 110 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating-system compatibility\u003c\/td\u003e\n\u003ctd\u003eWindows and macOS; older Linux CreatWare version available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cp\u003eCreatBot lists 0.3, 0.4, 0.8 and 1.0 mm nozzle options in addition to the standard listed 0.6 mm diameter.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle Diameter\u003c\/th\u003e\n\u003cth\u003eSelection Consideration\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003ctd\u003eFine features and smaller extrusion lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003ctd\u003eGeneral balance between detail and material output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8 mm\u003c\/td\u003e\n\u003ctd\u003eIncreased deposition for larger parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.0 mm\u003c\/td\u003e\n\u003ctd\u003eHigh material output where fine detail is secondary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNozzle construction, abrasion resistance, hotend compatibility and accessory part numbers should be confirmed for the intended material before ordering.\u003c\/p\u003e\n\u003ch3\u003eSupport \u0026amp; Resources\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCustomer Reviews and Feedback\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCustomer reviews and application feedback for the CreatBot D400 HS will appear here as they become available.\u003c\/p\u003e\n\u003cp\u003ePrecision 3D Works does not publish fabricated testing claims or customer experiences. Contact our team for guidance based on your part, material and workflow requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOwner’s Manual\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReview the official CreatBot D400 HS User Manual before installation and operation.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/4215\/8338\/files\/D400_HS-user_manual-EN.pdf?v=1789041056\" target=\"_blank\" title=\"CreatBot D400 HS User Manual\" rel=\"noopener\"\u003eDownload the CreatBot D400 HS User Manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe manual covers safety, controls, networking, calibration, print preparation and operating procedures.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/4215\/8338\/files\/D400_HS.pdf?v=1789041051\" target=\"_blank\" title=\"CreatBot D400 HS Brochure\" rel=\"noopener\"\u003eDownload the CreatBot D400 HS Brochure\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CreatBot D400 HS carries a limited manufacturer warranty for 12 months from delivery to the first end user.\u003c\/p\u003e\n\u003cp\u003eCreatBot identifies nozzles and hotends as consumable products with a six-month warranty. Coverage remains subject to the manufacturer’s terms, exclusions, operating instructions and maintenance requirements.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/4215\/8338\/files\/CreatBot_1-Year_Warranty.pdf?v=1787906630\" target=\"_blank\" title=\"CreatBot 12 month\/ 1 Year Standard Warranty document\" rel=\"noopener\"\u003eReview the CreatBot Warranty Policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor warranty assistance, contact Precision 3D Works with your order information, machine serial number and a description of the issue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration Assistance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoosing an industrial 3D printer involves more than matching the build volume to a CAD model. Material behavior, support strategy, nozzle selection, electrical requirements and expected throughput all affect the correct configuration.\u003c\/p\u003e\n\u003cp\u003ePlease \u003cstrong\u003eRequest a Quote\u003c\/strong\u003e for current pricing and lead time, or \u003cstrong\u003eTalk to an Expert\u003c\/strong\u003e to discuss your intended parts, materials and production requirements with Precision 3D Works.\u003c\/p\u003e","brand":"CreatBot","offers":[{"title":"Default Title","offer_id":48469440037122,"sku":"CTD400HS","price":5999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/4215\/8338\/files\/CreatBotD600Pro3HS_6.webp?v=1789037933","url":"https:\/\/precision3dworks.com\/products\/creatbot-d400-hs-3d-printer","provider":"Precision 3D Works","version":"1.0","type":"link"}